Speed bumps
8 (812) 318-18-49 8-800-775-01-78

Login
Registration
 

Speed bumps

Sleeping policeman is a modern instrument of the road traffic safety and improvement. Much depends on the quality of the rubber made speed humps, as well as on the quality of retroreflective elements: increased durability, prolongs the service life of bumps. Have the ability to perform bumps reinforced steel cord.


Sleeping policeman IDN 300

Sleeping policeman IDN 300, or low-profile artificial roughness (NIN), is recommended for installation on the streets with the speed limit on the roads and streets of the local value, on a quarterly and inter-yard roads, residential areas, areas of Parking lots near big shops, the Park roads, driveways and in other cases not stipulated by GOST R 52605-2006.

Segment lying policeman IDN 300 is a monolithic black rubber unit of different classes, depending on the operating conditions. Overall dimensions of the Central segment of HH mm. In the pits, located on the surface, pasted reflective yellow tape. Range of operation lies in the temperature of surrounding air from minus 40 C to plus 70 degrees C. Possible to use metal fittings for improvement of operational properties.

The principle of operation and installation: the Segments are lying policeman on asphalt and a rigidly fastened among themselves by means of fastening «swallow tail». The simplicity and portability of the Assembly and installation allows you to use them temporarily and permanently that differs from analogues. Temporary installation is planned on the areas of short-term variation or limitation of driving speed (during the road-repair works, ensuring the free movement of vehicles and the like). Products have holes for attachment to the roadway using anchor bolts.

moreclose

Sleeping policeman IDN 500

Purpose: speed bumps IDN 500 is intended for guaranteed speed limits for vehicles in places of high accident risk. The product is widely spread on the roads near hospitals, schools, kindergartens, supermarkets, gas stations, Parking lots, on the road side roads unregulated intersections, as well as administrative and departmental areas with protected entry or checkpoint.

Design features: sleeping policeman consists of 3 or more segments.
The Central segment of the speed bump 500 is a monolithic black rubber unit of different classes, depending on the operating conditions. Overall dimensions of the Central segment of him. In the pits, located on the surface, pasted reflective yellow tape.
Lateral segments (left and right) are monolithic rubber unit semicircular shape him.
On the outer surface of the ledges of the oval form with variable height contour segment to prevent slipping wheels of motor transport.
Range of operation lies in the temperature of surrounding air from minus 40 C to plus 70 degrees C.
Perhaps the use of metal fittings for improvement of operating properties.

The principle of operation and installation: the Segments are on the ground, asphalt and a rigidly fastened among themselves by means of fastening «swallow tail». The simplicity and portability of the Assembly and installation allows you to use them temporarily and permanently that differs from analogues.
Temporary installation is planned on the areas of short-term variation or limitation of driving speed (during the road-repair works, ensuring the free movement of vehicles, etc). Products have holes for attachment to the roadway using anchor bolts.
JN 500 made in accordance with the guidelines agreed with the Ministry of internal Affairs of the Russian Federation, Ministry of transport of the RF, State Secretary of the Chairman of the CC of the RF for construction and housing and communal complex.

moreclose

Sleeping policeman IDN 700

Sleeping policeman IDN 700 is intended for guaranteed speed limits for vehicles in places of high accident risk. The product is widely spread on the roads near hospitals, schools, kindergartens, supermarkets, gas stations, Parking lots, on the road side roads unregulated intersections, as well as administrative and departmental areas with protected entry or checkpoint.

Design features: sleeping policeman consists of 3 or more segments.
The Central segment of the speed bump 700 is a monolithic black rubber unit of different classes, depending on the operating conditions. Overall dimensions of the Central segment of him. In the pits, located on the surface, pasted reflective yellow tape.
Thanks slightly extended the Central part of the IDN 700 during the passage of this sleeping policeman has a more gentle effect on the suspension than the speed bump 500.
Lateral segments (left and right) are monolithic rubber unit semicircular shape him.
On the outer surface of the ledges of the oval form with variable height contour segment to prevent slipping wheels of motor transport.
Range of operation lies in the temperature of surrounding air from minus 40 C to plus 70 degrees C.
Perhaps the use of metal fittings for improvement of operating properties.

The principle of operation and installation: the Segments are on the ground, asphalt and a rigidly fastened among themselves by means of fastening «swallow tail». The simplicity and portability of the Assembly and installation allows you to use them temporarily and permanently that differs from analogues.
Temporary installation is planned on the areas of short-term variation or limitation of driving speed (during the road-repair works, ensuring the free movement of vehicles, etc). Products have holes for attachment to the roadway using anchor bolts.

moreclose

Sleeping policeman IDN 900

Sleeping policeman IDN 900 is designed for guaranteed speed limits for vehicles in places of high accident risk. The product is widely spread on the roads near hospitals, schools, kindergartens, supermarkets, gas stations, Parking lots, on the road side roads, unregulated intersections, as well as administrative and departmental territories protected by the check-in or check-point.

THE DESIGN FEATURES A SPEED BUMP IDN 900:

Consists of six or more segments.
The Central segment represents a monolithic rubber unit of different classes, depending on the operating conditions. Overall dimensions HH (2 segment Assembly) mm In holes located on the surface, pasted reflective yellow tape.
Lateral segment represents a monolithic rubber unit of the semicircular form.
On the outer surface of the hump ledges of the oval form with variable height contour segment to prevent slipping wheels of motor transport.
Range of operation lies in the temperature of surrounding air from minus 40 C to plus 70 degrees C.
Perhaps the use of metal fittings for improvement of operational properties.

Sleeping policeman IDN 900 thanks wider surface significantly reduces the discomfort of his deserting them, and more adapted for heavy vehicles and passenger transport.

The principle of operation and installation: the Segments are on the ground, asphalt and a rigidly fastened among themselves by means of fastening «swallow tail». The simplicity and portability of the Assembly and installation allows you to use them temporarily and permanently that differs from analogues. The segments have holes for attachment to the roadway using anchor bolts.

moreclose

Sleeping policeman IDN 1100

Purpose: sleeping policeman IDN 1100 intended for guaranteed speed limits for vehicles in places of high accident risk. The product is widely spread on the roads near hospitals, schools, kindergartens, supermarkets, gas stations, Parking lots, on the road side roads, unregulated intersections, as well as administrative and departmental territories protected by the check-in or check-point.

Features
GOST R 52605-2006 have the dimensions of the elements of bumps, depending on the desired limit the maximum speed of movement of motor transport (see table 3 standard).
In accordance with GOST at the maximum permitted speed that is stated on the sign, 30 km/h length of basic chords and boundary elements irregularities should be from 500 mm to 700 mm inclusive.
When the maximum permitted speed that is stated on the sign, 40 km/hour length chords of relevant elements of irregularities collapsible constructions should be from 900 mm to 1100mm inclusive.
Obviously, regulated by the standard ratio of the maximum speed of the vehicle and the size of elements bumps creates a more sparing mode of passing car irregularities and reduces negative impact on its components and assemblies.
Considering the above factors, our organization has expanded the size range of us bumps. In the development of this subject in addition to the current IDN 500x500 and IDN 900x500 we will launch the production of IDN h and IDN h (in development) Thus our company in its activity covers the whole range of sizes bumps regulated by GOST R 52605 - 2006.

The principle of operation and installation: the Segments are on the ground, asphalt and a rigidly fastened among themselves by means of fastening «swallow tail». The simplicity and portability of the Assembly and installation allows you to use them temporarily and permanently that differs from analogues. The segments have holes for attachment to the roadway using anchor bolts.

moreclose

Related Articles




Уважаемые дамы и господа. В связи с изменением голосового приветствия, Наша компания уведомляет Вас о том, что ООО «ПКФ «РТД» входит в группу компаний «РУССКИЕ РЕЗИНЫ». Руководителем всех организаций является Шевчук В.М.
×